Plant Corrosion Engineer

Plant Corrosion Engineer- Relocation to Saudi Arabia is required

Key Responsibilities:

As the successful candidate you will be required to perform the following:

• Implement corrosion management program and on-stream monitoring and Conduct risk-based inspection based on API-580 methodology.
• Review and approve recommend solutions for coating failures and cathodic protection and participate in Hazard and Operability Study (HAZOP) review sessions and ensure that all issues are addressed.
• Manage water treatment program and recommend solutions to overcome challenges and review design packages and validate materials selection based on current code and standards.
• Validate corrosion controls corrosion controls, corrosion (CCD), corrosion loops and corrosion damage mechanisms frequently.
• Assess FEED composition changes and approve recommend solution to assure assets integrity.
• Develop scope and description of technology items, and lead field implementation.
• Develop and transfer knowledge about use of coating, Cathodic protection (CP), corrosion inhibitors and other corrosion controls and best practices.
• Extract data and draw conclusions from Corrosion Monitoring Technologies, and troubleshoot corrosion problems and address root causes.
• Perform the regular review and update on the plants Integrity Operating Windows (IOW) and Corrosion loops drawings shall be updated by adding emerging damage mechanisms or removing damage mechanisms because of plant upgrades.
• Adjust and modify inspection practices and programs shall be reflected based on such modifications and perform special studies in corrosion control. Evaluates data as to scope, impact and long-range cost effectiveness on existing and new projects.
• Review operations and monitoring activities to identify needed system modifications or procedural changes associated with corrosion control with conduct corrosion mitigation and integrity review to optimize the inspection and corrosion programs and maintain assets integrity.

Minimum requirements

As the successful candidate you will have:

• Bachelor's degree in engineering, preferably in mechanical engineer.
• 15 years' experience processing in Oil/Gas Industry.
• Demonstrate experience in material science and metrology, different NDT technology and their applications and knowledge in engineering aspect of welding.
• Strong Knowledge of international standards and codes NACE, ASME, API and ASTM especially inspection and corrosion standards such as API-571, API-580, API-570 and API-510.
• Valid NACE Specialist Certification or NACE Senior Corrosion Technologist or combination of NACE Corrosion Technologist, API-571 and NACE CP level II.

Only qualified candidates will be contacted.